4M N.C Surfacer H.V
Characteristic properties
Nitrocellulose Surfacer has good coverage, dries perfectly, fills pores, and is easy to sand. Contains engineered raw materials that provide Very good adhesion properties to porous wood. This ensures coverage with a spread rate for a wide range of paint finishes
With different levels of gloss.
Viscosity : 42 ± 2 sec / ford cup 4 at 25 °C
Solid content : 53 ± 2%
Density : 1..44 ± 0.02 gm/cm3
Coverage : 6-8 m2/Kg
Shipping & Delivery
-
Courier delivery
Our courier will deliver to the specified address
2-3 Days
From $20
- DHL Courier delivery
DHL courier will deliver to the specified address
2-3 Days
From $40
-
Warranty 1 year
- Free 30-Day returns
Wood Coatings
Specification
Overview
Description
Materials for application
- C Surfacer H.V
- Thinner 5025
Suitable substrate and surface preparation
metal surfaces
– polyester putty
Nitro Cellulose Paste
– old paint
The following sandpaper is used to make the surface smooth:
P400: For sanding using water (mechanical or manual)
P280: For dry sanding [mechanical or manual]
Mixing ratio
| surfacer | Thinner 5025 |
| 100 | 150 – 200 |
Drying times
| 20oc | 60oc | |
| initial dryness | 30 minute | 20 minute |
| final dry | 3-4 hours | 1 hour |
spraying instructions
Spray3-2 different layers
Wait 10-5minutes for complete drying between layers
spray conditions
| spray gun | Spray gun aperture diameter | Air pressure required for spraying |
| Gravity feed | 1.6 – 1.8 | 2 – 3 |
Packaging
1kg – 1.100kg – 4.300kg – 18kg
20kg – 23kg – 25kg – 21 kg
color
White – grey – yellow
Expiry
1 years at 20oc
Material safety data
When using these products it is required to comply with the national regulations for health and safety