4M Duco base Colors
Characteristic properties
A quick-drying glossy nitro-cellulosic coating that gives a surface that has a high adhesion force after complete drying. It gives a hard surface that is resistant to cracking.
With the flexibility in the paint layer as it is non-porous, which helps in maintaining the car body from corrosion
Viscosity : 43+/-2 sec/ ford cup 8 at 25 °C
Density : 10.1-0.97gm/cm3
Coverage : 4-6 m2/Kgm
Bending : good
Shipping & Delivery
-
Courier delivery
Our courier will deliver to the specified address
2-3 Days
From $20
- DHL Courier delivery
DHL courier will deliver to the specified address
2-3 Days
From $40
-
Warranty 1 year
- Free 30-Day returns
Wood Coatings
Specification
Overview
Description
Materials for application
- Duco base
- Thinner 5025
Suitable substrate and surface preparation
- The surface should be dry, smooth, free from dust and grease.
- Previously painted surfaces after removing scales and pimples.
- Suitable for painting metal and wood.
: The following sandpaper is used to make the surface smooth
- ىP400: Sanding with water, mechanically or manually
- P280: For dry sanding mechanically or manually
Mixing ratio
Dilute with Thinner 5025 to the right viscosity, then apply using a spray gun or brush
thickness of paint layer
17-12 micron per layer
spray viscosity
22 -18 ford cup 4 at 20 °C
spraying instructions
Spray3-2 different layers
Wait 10-5minutes for complete drying between layers
spray conditions
| spray gun | Spray gun aperture diameter | Air pressure required for spraying |
| Gravity feed | 1.2 – 1.5 | 3-4 |
Drying times
| 20oc | 60oc | |
| initial dryness | 20 minute | 10 minute |
| final dry | 6-8 hour | hour |
Packaging
2.500kgm – 23kgm
Expiry
2 years at 20oc
color
White – silver – red – yellow oxide
Material safety data
When using these products it is required to comply with the national regulations for health and safety