4M 2K Filler
Characteristic properties
It is a 2K acrylic filler developed for use under 2K acrylic paints and ready mix or with base coats. It is easy to apply and flat giving good final appearance.
Viscosity : 00:20 – 00:25 sec Cup#4 dill 2:1 by B.Ac at 25 °C
Solid content : 72 ± 2%
Density : 1.70-1.74 g/cm3
Shipping & Delivery
-
Courier delivery
Our courier will deliver to the specified address
2-3 Days
From $20
- DHL Courier delivery
DHL courier will deliver to the specified address
2-3 Days
From $40
-
Warranty 1 year
- Free 30-Day returns
Wood Coatings
Specification
Overview
Description
Materials for application
- 2K Filler
- 2K Filler Hardener
- Thinner 9006, Super Thinner
Suitable substrate and surface preparation
– 4M 2K filler can be applied over PE putties/body fillers, 2K Epoxy Primers, 2K Wash
Primers, 1K Etch Primers, original OEM primers, GRP, and over well sanded old finishes in
solid conditions. To reach optimum performance, the surface should be properly cleaned and degreased.
Mixing ratio
| Thinner | 2K Filler Hardener | 4M 2K Filler |
| 25 | 25 | 100 |
Pot life
4 hours at 20 ºC
Spraying conditions
Overcoating
2K filler can be overcoated after sanding. It is overcoated with 2K topcoats, and with basecoat colors
Other tips
- For optimum application ensure that both spray booth temperature and paint temperature
are between 20°C and 25°C.
- Clean the spray gun thoroughly immediately after the use of 2K products.
Packaging
1.00 kg
color
Grey, White, Red, Black.
Expiry
2 years at 20oc
Material safety data
- For full Health and Safety information refer to Material Safety Data Sheet (MSDS).
- Observe the precautionary notices displayed on the container.
- Goggles and suitable protective equipment must be worn while using these products.
- Good ventilation must be provided in the working environment.